Knowledge Base > Android Device Management > Company-Owned Personally Enabled (COPE) Device Management > Enrollment Configurations for Work Profile on Corporate Owned (WPCO/COPE) Devices

Enrollment Configurations for Work Profile on Corporate Owned (WPCO/COPE) Devices

Updated 2 months ago by Shally Maheshwari

Enrollment Configurations would allow you to create a COPE configuration wherein you can choose an auto device-naming convention, and create a BYOD profile with COPE configurations which should be applied to the devices that enroll using this configuration.

This document illustrates how to create an enrollment configuration for COPE devices.

Pre-requisite

Either a user group having profile with COPE configurations should exist on Scalefusion Dashboard or BYOD profile with COPE configurations should be created.

Creating an Enrollment Configuration

On Scalefusion Dashboard, navigate to Enrollment Configurations ➞ QR Code Configurations. This section displays all the device enrollment configurations that you have created.
Click on Create config to open the configuration creator window.
The configurator creator is divided into 3 steps as explained below,
1. Basic: Use this section to set the following:
  1. Configuration Name: A name for this configuration
  2. Choose Enrollment Type: Select WPCO/COPE.
  3. Device Naming Convention: Choose a naming convention that will be used to auto-generate device names when the devices are enrolled using this configuration.
  4. Click Next
2. Group / Profile: The next section is to choose User Groups or Android Device Profile. You can select one of them. The Android Device Profiles drop-down will list only those BYO profiles on which COPE is configured. Click NEXT once you have selected the profile.
3. The Optional Settings section helps you set a default license for the devices enrolled using this configuration. This is an optional section and can be left blank. If the selected licenses has no free slots or this option is left blank, then the next available license is used to enroll the device.
  Additional Enrollment Settings are configured to speeden up the enrollment process when you are enrolling via 6-times tap and scan a QR.
4. Click SAVE once done
On saving, the QR Code configuration will appear on the configuration listing.
The device can be enrolled now.