All Utilities

This section is a collection of nifty utilities to make your device management even more easy. Send Broadcasts, take actions on devices in bulk, clear files on sd cards, and more, all from one place.

Security Incident Settings

Enable Security Incidents

This setting will let you know when someone tries to forcefully exit the Scalefusion app (failed unlock attempts) and other intrusions related to SIM swaps. This option is for Android only.

1. Unlock Attempt count: This lets you set up the number of failed attempts after which the Unlock Attempts should be captured. The minimum is 1 and the maximum is 5.

   

2. Delete Security Incidents History: This will allow you to delete all security incidents- failed unlock attempts and SIM swaps. Please note there is no undo for this hence it is recommended to use this option with caution.

   

Lock/Unlock Devices

This will allow you to remotely lock or unlock your Android, iOS, and macOS devices in Kiosk mode.

1. You can lock or unlock the devices from the list of devices shown under the Devices tab.
2. Or, you can lock or unlock all the devices that are added to a Device group in one go from the Device Groups tab.

   

3. You can also filter out the devices based on Locked or Unlocked devices or All.

   

Secure Settings

Use these settings to configure the Secure settings for the devices that are not added to a Device Group or on which no Device Profile is applied, or on devices on which Device Profile-level secure settings are not enabled. This option is for Android only.

1. Global Settings: This will apply the same set of settings on all the devices showing up in the Secure Settings section.

   

1. Device level settings: This will configure the settings for a single device. Click on the gear icon under ACTIONS column for a particular device.

   

Clear App Data

This section allows you to clear the app data for selected apps on selected devices or Device groups. This option is for Android only.

1. Select Devices/Device Groups: You can select Device Groups to send the clear app data push to all the devices that are part of that specific group. Or you can select Device(s).

   

2. Select Apps: Next, select the app(s) for which you will like to clear app data. The apps showing in this tab will be the apps that have been allowed in the Select Apps section in the Device Profile.
3. Click on Clear Data button.

   

Clear Files

This will clear files from the internal storage on all the devices. This option is for Android only.

The following items will be deleted:

1. Photos and images stored in Gallery.
2. Video and audio files stored in Gallery.
3. Clear Broadcast Messages: Enabling this option will delete all the broadcast messages sent to the devices.

   

4. Select Devices: You can select the device(s) from which Files and Broadcast messages can be deleted.

   

Copy Settings

This allows you to copy the pre-selected settings of one device to other devices. This is for the devices that are not part of any Device Profile or Device Group. This option is for Android only.

1. From Device: Select the device from which you would like to copy the settings.
2. Target Devices: Select the device(s) to which you would like to copy the settings.
3. Click on Copy button.
4. The target device will show the app and policies similar to the initial device.

   

Duplicate Devices

This section helps IT Admins to check if they have enrolled the same device twice. This option works for Android, iOS, and macOS. Duplicate device entries may happen in the following scenarios:

1. If the device is factory reset or re-enrolled via Zero-Touch, or DEP.
2. If the user, locally removes the MDM Profile on Mac devices or re-enrolls the device.
3. Admin is enrolling the device as EMM managed however the device does not enroll as EMM managed device. So admin might reset the device(s) and re-enroll.
4. In all the above cases, if the previous device entry has not been deleted from the dashboard, then re-enrollment creates a duplicate device.

   

How to remove duplicates

1. Select Devices: You have the option to manually select the duplicate device (based on the last seen time stamp) and delete the device. Put a check in front of the device (the one with earlier time stamp) and click on the Delete button on top.

1. Actions: Click on the delete icon under Actions to delete the duplicate device.
   

   

2. Clean up: If there are large number of duplicates, you can use the Clean Up utility to remove duplicates in one go. Click on the Clean up button on top right. There will be two options displayed in drop-down:
   1. Clean Up Now: This will clean up the duplicate device entries based on the last seen time stamp.

      

   2. Schedule Clean Up: You can schedule the time and frequency to auto-delete the duplicate devices. Clicking on Schedule Clean Up will open up a dialog where you can set the Time, TimeZone and frequency at which the clean up should take place.

      

Nudge Inactive Device

This option helps the IT Admins to send a nudge to devices that might be sitting ideal.

Buzz Devices

This option allows IT Admins to play a short notification sound on any device while it is locked in Scalefusion.

Broadcast Messaging

This option allows IT Admins to send messages to the users' Android, iOS, Mac, and Windows 10 devices from Scalefusion. These messages are displayed as a pop-up and will be saved on the device for future reference.

Please refer to our guide here for more information.

Global Settings

Through the Global settings, IT admins can configure general settings across various platforms like Android, iOS, Windows, and macOS.

Please refer to our guide here for more information.